L-930
Flame Retardant Epoxy Carbon Prepreg
Click For
Page 2
Product Data Sheet Revised 12/21/06
Description

L-930 is an adhesive prepreg based on toughened flame retardant, epoxy resin reinforced with carbon fibers.
Advantages of L-930
  • Finally, a true adhesive prepreg for building sandwich panels with carbon reinforced facings. L-930 delivers high peel strength from a toughened matrix for panel applications where the designer is seeking a higher degree of damage tolerance.
  • L-930 is extremely flame retardant which allows the designer to use L-930 in a wide variety of structural applications.
  • Available in unidirectional and woven forms, the designer can tailor fiber orientation to the load paths.
  Physical Properties on 3K70P Carbon Fabric
  • Standard Weight: 0.072 lbs/ft2 (352 g/m2)
  • Standard Resin Content: 45% by weight
  • Volatile Content: 3% by weight
  • Standard Tack: Medium
  • Cured Ply Thickness: 0.007” (0.178 mm)
  • Other Weights, Resin Contents, and Fabrics are Available.
Flammability
  • Self Extinguishing per FAR part 25.853
 Availability
  • Up to 60” width in rolls up to 100 yards long (152 cm x 91 m)
Shelf Life
  • 6 months at 40°F (4°C) or below
  • 14 days at Room Temperature (70°F or 21°C)
Cure Cycles
  • 60 minutes at 250-275°F (121-135°C)
Click For Page 2

NOTICE:Product data and parameters cited in this publication have been obtained in J.D. Lincoln, Inc. laboratories using the materials under carefully controlled conditions. The information, therefore, is believed to be accurate and correctly stated. Data of this type may be considered to be indicative of representative properties obtainable. J.D. Lincoln, Inc. cannot accept responsibility for the misapplication of these products, nor for their use under uncontrolled conditions. Numerical values resulting from the application of this material are dependant on processing details. It is recommended that the user develop his or her own application techniques and generate data consistent with his or her specific application and process.

 
       
Website Copyright 1996-2008 by J.D. Lincoln Inc.
A Member of the Umeco Plc Group.