| |
L-930(GT700)
Solution Coated UD Epoxy Prepreg |
|
|
| Typical Applications |
- Interior Sandwich Panel Facings
- Automotive and Motorcycle Components
- Sporting goods
- Doublers and Stiffeners for Doors, Access Panels
- Marine and Rail Applications
- An upgraded version of L-930(GT700) is available for slightly higher temperature performance. Called L-930HT(GT700), is qualified to a number of aerospace specifications.
- GT700 Fiber = Generic 32 MM Modulus Fiber with 700 KSI (48 GPa) Tensile Strength.
|
| Mechanical Data |
|
LAMINATE PROPERTIES |
PROPERTY |
100 PSI (690 MPa) CURE |
TEST METHOD |
ULTIMATE TENSILE (0°) STRENGTH |
|
|
Room Temperature (RT) |
225 KSI (1.6 GPa) |
ASTM D 3039 |
160°F (71°C) |
200 KSI (1.4 GPa) |
ASTM D 3039 |
TENSILE (0°) MODULUS |
|
|
Room Temperature (RT) |
17.0 MSI (117 GPa) |
ASTM D 3039 |
160°F (71°C) |
17.1 MSI (118 GPa) |
ASTM D 3039 |
COMPRESSION (0°) STRENGTH |
|
|
Room Temperature (RT) |
180 KSI (1.2 GPa) |
SACMA SRM IR-94 |
COMPRESSION (0°) MODULUS |
|
|
Room Temperature (RT) |
16.1 MSI (111 GPa) |
SACMA SRM IR-94 |
ULTIMATE FLEXURAL (0°) STRENGTH |
|
|
Room Temperature (RT) |
150 KSI (1.0 GPa) |
ASTM D 790 |
160°F (71°C) |
140 KSI (966 MPa) |
ASTM D 790 |
FLEXURAL (0°) MODULUS |
|
|
Room Temperature (RT) |
15.0 MSI (103 GPa) |
ASTM D 790 |
160°F (71°C) |
15.0 MSI (103 GPa) |
ASTM D 790 |
SHORT BEAM SHEAR (0°) STRENGTH |
|
|
Room Temperature (RT) |
12 KSI (83 MPa) |
ASTM D 2344 |
FLATWISE TENSILE STRENGTH |
|
|
Room Temperature (RT) |
420 PSI (2.9 KPa) |
ASTM C 297 |
HYDRAULIC FLUID RESISTANCE |
Pass |
Industry Std |
|
| |
|
|
NOTICE:Product data and parameters cited in this publication have been obtained in J.D. Lincoln, Inc. laboratories using the materials under carefully controlled conditions. The information, therefore, is believed to be accurate and correctly stated. Data of this type may be considered to be indicative of representative properties obtainable. J.D. Lincoln, Inc. cannot accept responsibility for the misapplication of these products, nor for their use under uncontrolled conditions. Numerical values resulting from the application of this material are dependant on processing details. It is recommended that the user develop his or her own application techniques and generate data consistent with his or her specific application and process.
|
|
|
