L-530
Solution Coated Epoxy Prepreg
Click For
Page 2
Product Data Sheet Revised 4/22/09
Description

L-530 is a solution coated epoxy prepreg which has been modified to increased flame resistance, and is available on fiberglass fabrics such as 7781 or other styles as requested.

Advantages of L-530
  • Formulated to provide both superior laminating properties and flame resistance.
  • Can be used for sandwich panels without adhesive film because of outstanding peel strength on most core materials.
  • Meets the challenge of impact damage while forming a sturdy base for decorative Tedlar facings.
  Physical Properties on 7781 Glass Fabric
  • Standard Weight: 0.100 lbs/ft2 (488 g/m2)
  • Standard Resin Content: 38% by weight
  • Volatile Content: 2% by weight
  • Standard Tack: Medium
  • Cured Ply Thickness: 0.010” (0.254 mm)
  Flammability
  • Self Extinguishing per FAR part 25.853
 Availability
  • Up to 60" width in rolls up to 100 yards long (152 cm x 91 m)
  Shelf Life
  • 6 months at 40°F (4°C) or below
  • 21 days at Room Temperature (70°F or 21°C)
 Cure Cycle
  • 60 minutes at 250-275°F (121 - 135°C)

NOTICE:Product data and parameters cited in this publication have been obtained in J.D. Lincoln, Inc. laboratories using the materials under carefully controlled conditions. The information, therefore, is believed to be accurate and correctly stated. Data of this type may be considered to be indicative of representative properties obtainable. J.D. Lincoln, Inc. cannot accept responsibility for the misapplication of these products, nor for their use under uncontrolled conditions. Numerical values resulting from the application of this material are dependant on processing details. It is recommended that the user develop his or her own application techniques and generate data consistent with his or her specific application and process.

 
       
Website Copyright 1996-2010 by J.D. Lincoln Inc.
A Member of the Umeco Plc Group.