| |
L-502
Woven Adhesive Prepreg |
|
|
| Cure Cycles |
- 40 minutes at 275°F (135°C), or
- 60 minutes at 250°F (121°C), or
- 90 minutes at 235°F (113°C).
- Preferred Cure Cycle 60 minutes at 270°F (132°C)
|
| Sandwich Properties* |
Core: ¼” cell x 0.004” (6.35 mm cell x 0.10 mm) Aluminum Foil
Facings: 2 plies L-502-7781 each side
- RT Flatwise Tensile Strength: 1,300 PSI (9.0 MPa)
- RT Sandwich Peel Strength: 4 in lb/in (18 N/25 mm)
- *Sandwich peel strength varies with the orientation of the fibers directly against the core and the test direction.
- Fibers laid up parallel with the test direction produce minimum strengths.
- Fibers laid up perpendicular to the test direction produce maximum strengths.
- L-502-7781 sandwich peel strength ranges from 3-5 in lb/in (13-22 N/25 mm).
|
| Mechanical Data |
|
LAMINATE PROPERTIES |
PROPERTY |
25 PSI (0.17 MPa) CURE |
VACUUM BAG CURE |
TEST METHOD |
ULTIMATE TENSILE STRENGTH |
|
|
|
Room Temperature (RT) |
59 KSI (407 MPa) |
54 KSI (372 MPa) |
ASTM D638 |
160°F (71°C) |
50 KSI (345 MPa) |
46 KSI (317 MPa) |
ASTM D638 |
RT(WET) |
52 KSI (359 MPa) |
50 KSI (345 MPa) |
ASTM D638 |
|
|
|
|
TENSILE MODULUS |
|
|
|
Room Temperature (RT) |
3.7 MSI (26 GPa) |
3.6 MSI (25 GPa) |
ASTM D638 |
160°F (71°C) |
3.5 MSI (24 GPa) |
3.4 MSI (23 GPa) |
ASTM D638 |
RT(WET) |
3.5 MSI (24 GPa) |
3.3 MSI (23 GPa) |
ASTM D638 |
|
|
|
|
COMPRESSIVE STRENGTH |
|
|
|
Room Temperature (RT) |
61 KSI (421 MPa) |
58 KSI (400 MPa) |
ASTM D695 |
160°F (71°C) |
51 KSI (352 MPa) |
43 KSI (297 MPa) |
ASTM D695 |
RT(WET) |
53 KSI (366 MPa) |
50 KSI (345 MPa) |
ASTM D695 |
|
|
|
|
COMPRESSIVE MODULUS |
|
|
|
Room Temperature (RT) |
3.7 MSI (26 GPa) |
3.6 MSI (25 GPa) |
ASTM D695 |
160°F (71°C) |
3.6 MSI (25 GPa) |
3.5 MSI (24 GPa) |
ASTM D695 |
RT(WET) |
3.6 MSI (25 GPa) |
3.5 MSI (24 GPa) |
ASTM D695 |
|
|
|
|
ULTIMATE FLEXURAL STRENGTH |
|
|
|
Room Temperature (RT) |
86 KSI (593 MPa) |
78 KSI (538 MPa) |
ASTM D790 |
160°F (71°C) |
61 KSI (421 MPa) |
53 KSI (366 MPa) |
ASTM D790 |
|
|
|
|
FLEXURAL MODULUS |
|
|
|
Room Temperature (RT) |
3.5 MSI (24 GPa) |
3.4 MSI (23 GPa) |
ASTM D790 |
160°F (71°C) |
3.2 MSI (22 GPa) |
3.2 MSI (22 GPa) |
ASTM D790 |
|
|
|
|
INTERLAMINAR SHEAR |
|
|
|
Room Temperature (RT) |
6.0 KSI (41 MPa) |
5.3 KSI (37 MPa) |
ASTM D2344 |
|
| |
|
|
NOTICE:Product data and parameters cited in this publication have been obtained in J.D. Lincoln, Inc. laboratories using the materials under carefully controlled conditions. The information, therefore, is believed to be accurate and correctly stated. Data of this type may be considered to be indicative of representative properties obtainable. J.D. Lincoln, Inc. cannot accept responsibility for the misapplication of these products, nor for their use under uncontrolled conditions. Numerical values resulting from the application of this material are dependant on processing details. It is recommended that the user develop his or her own application techniques and generate data consistent with his or her specific application and process.
|
|
|
