L-361RT
Film Adhesive, Ambient-Temperature Cure
Click For
Page 1
Product Data Sheet Revised 12/20/06
Description

L-361RT is an ambient-temperature curing, high-strength, flame retardant, modified epoxy film adhesive. L-361RT is intended to be used for bonding of aluminum, fiberglass, aramid, and other structural materials.

Advantages of L-361RT
  • The high strength and high toughness of L-361RT allows the designer to use this material in high abuse areas such as aircraft interiors, cargo systems, marine structural bulkheads, etc.
  • L-361RT offers low-temperature curing for applications where elevated processing temperatures are problematic. Curing can be done in a vacuum bag, platen press, or autoclave from 48 hours at 75°F (24°C) or in just 12 hours at 75°F (24°C) with contact pressure.
  Physical Properties
  • Standard Weight: 0.030 lbs/ft2 (146 g/m2)
  • Optional Weights: 0.045 lbs/ft2, 0.060 lbs/ft2
  • Standard Thickness: 0.007“ (0.178 mm)
  • Volatile Content: Less than 2.0%
  • Tack: High Tack
  Availability
  • 50" Wide Rolls x 25 Yards Long (127cm x 23m)
  Shelf Life
  • 2 months at 0°F (-18°C)
  Maximum Lay Up Life
  • 8-10 hours at RT (75°F or 24°C)

NOTICE:Product data and parameters cited in this publication have been obtained in J.D. Lincoln, Inc. laboratories using the materials under carefully controlled conditions. The information, therefore, is believed to be accurate and correctly stated. Data of this type may be considered to be indicative of representative properties obtainable. J.D. Lincoln, Inc. cannot accept responsibility for the misapplication of these products, nor for their use under uncontrolled conditions. Numerical values resulting from the application of this material are dependant on processing details. It is recommended that the user develop his or her own application techniques and generate data consistent with his or her specific application and process.

 
       
Website Copyright 1996-2008 by J.D. Lincoln Inc.
A Member of the Umeco Plc Group.