L-333
Modified Epoxy Film Adhesive
Click For
Page 2
Product Data Sheet Revised 1/25/07
Description

L-333 is a 250°F (121°C) curing modified epoxy film adhesive suitable for a wide variety of metal to metal or metal to core bonding applications. L-333 provides excellent peel strength over a wide range of processing cycles and is very suitable to rapid ‘in-hot, out-hot’ cure cycles.
Advantages of L-333
  • Cure cycles as low as 235°F (113°C), varying heat-up rates, vacuum or positive pressure may be used without a significant reduction in bond joint strength.
  • Low volatile content makes L-333 ideally suited for large area sandwich or metal to metal sections.
  • L-333 exhibits excellent environmental resistance to salt spray, high-humidity, and standard test fluids.
  Physical Properties
  • Standard Weight: 0.060 lbs/ft2 (292 g/m2)
  • Optional Weights: 0.030 lbs/ft2, 0.045 lbs/ft2, 0.075 lbs/ft2, 0.090 lbs/ft2
  • Standard Thickness: 0.012“ (0.30 mm)
  • Volatile Content: Less than 0.5%
  • Tack: Slightly Tacky
  Flammability
  • A flame retardant version is available: L-333FR
  Availability
  • 48" Wide Rolls x 100 Yards Long ( 122 cm x 91 m)
  Shelf Life
  • 6 months at 40°F (4°C) or below
  • 7 days at Room Temperature (70°F or 21°C)

NOTICE:Product data and parameters cited in this publication have been obtained in J.D. Lincoln, Inc. laboratories using the materials under carefully controlled conditions. The information, therefore, is believed to be accurate and correctly stated. Data of this type may be considered to be indicative of representative properties obtainable. J.D. Lincoln, Inc. cannot accept responsibility for the misapplication of these products, nor for their use under uncontrolled conditions. Numerical values resulting from the application of this material are dependant on processing details. It is recommended that the user develop his or her own application techniques and generate data consistent with his or her specific application and process.

 
       
Website Copyright 1996-2008 by J.D. Lincoln Inc.
A Member of the Umeco Plc Group.